1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer


BlueLine Voltage Input Module   
  Das BlueLine Voltage Input Module is intended to serve for the basic recording of voltage signals as they are usually provided by injection molding machines in the form of 0...10 V output signals. These are usually set and actual signals of the machine parameters (hydraulic pressure, screw position, injection speed ans so on). The voltage signals are measured in the FILLCONTROL-Software as analog signals and documented as quality parameters or used for control purposes. The device has been developed for installation in the control cabinet and is connected to the I/O Master by the "Bus-In"-pin.


. Name File size    
Data sheet type 8983A Voltage Input Module 233.04 KB